Job management software
Job management software for trades: start with what a job is
Before you compare ServiceM8, Tradify, Fergus, Simpro and AroFlo, work out which kind of job your business actually runs. That one question rules out half the list.
If you're searching for job management software, you're probably looking at a list of apps that all promise the same thing: quote, schedule, invoice, done. Most of them are good at what they do. The trouble is they don't all do the same job, and the "best job management software" lists rarely tell you which kind of business each one was built for.
I spend my time inside construction and trades businesses working out how their systems, process and people fit together. I've put these packages in, connected them to other things, and replaced them when they didn't fit. This page is what I'd tell an owner before they book their first demo.
A quick note on who it's for. If you're a sole trader or a small crew doing a few service jobs a week, you don't need much of this. Pick one of the apps in the first camp below, try two or three on their free trials, and go with whichever your team actually likes using. This page is mostly for businesses with ten to a couple of hundred staff and a few systems already in the mix.
The first question: what is a job in your business?
Every trade business uses the word "job". It doesn't mean the same thing everywhere.
For some businesses a job is a service job. A service plumber or a service carpenter might knock over five or six a week, or that many in a day. A job might be an hour, a day, maybe two. A customer calls, someone gets booked in, the work gets done, the invoice goes out. There's still plenty to manage inside a service job, and some of them get complicated. But they're short, they're one-off, and there are lots of them.
For other businesses a job is a project. A crew of several people on the one site for weeks. There's a program to run, labour and materials to track against a budget, variations, progress claims, and usually a builder or head contractor above you with their own way of doing things. Even if you're one trade inside a much bigger build, you're managing a project for your business and delivering it.
Plenty of businesses do both. That's where it gets interesting, and I'll come back to it.
The reason this matters is simple: most job management software was built around one of these two, and then stretched to cover the other. Knowing which one you are tells you where to start looking, and what's going to hurt later.
Work out what a job is in your business before you book a single demo.
The four camps
Once you sort the market by what kind of job it was built for, it falls into four rough camps.
1. Service job apps
ServiceM8, Tradify, Fergus, Jobber and a few newer local ones.
These are built for the business doing lots of short jobs. Book it, get there, do the work, take photos, get paid. They're quick to set up, the phone apps are good, and they don't cost much. ServiceM8 prices by how many jobs you do a month rather than by user, from about $29 a month. Fergus starts around $53 a month.
Where they struggle is the multi-week job with several people on it. Job costing across stages, progress claims, retentions, a program that changes every week. You can force some of it in, but you'll feel it.
If you're mostly service and under about twenty staff, this camp is probably where your answer is.
2. Service platforms that stretch to projects
Simpro, AroFlo, Ascora and, at the bigger end, a few overseas platforms.
These are the big all-in-ones for trades. They do a huge amount: quoting, scheduling, stock, assets, maintenance contracts, timesheets, invoicing, reporting. If you're a larger business with a lot of process, one of these could cover a lot of what you need. Worth knowing: Simpro and AroFlo are the same company now. Simpro bought AroFlo in 2021 as part of a US$350 million investment from K1, and AroFlo still runs under its own brand. They're similar pieces of software, and I'd expect them to come together at some point.
I see two problems with this camp, and neither is that the software is bad.
It's a lot to take in. Some owners look at Simpro or AroFlo and can't get their head around it. There's so much in there that it's hard to see how your business maps onto it. A basic implementation, where someone sets up the defaults and runs a bit of training, often leaves the business half in and half out. What actually works is implementing it properly: working inside the business over months, not days, until it's embedded in how people work.
The last 20% doesn't fit. Most businesses have a few things they need that sit outside the product. A way of pricing, a compliance step, a report the client demands, the thing that makes you different from the next contractor. The package does 80% of the business well and the rest ends up in spreadsheets, or the business bends itself to fit the software. Often the better answer is to build or connect that missing piece on the side, so the core system keeps doing what it's good at.
A package that does 80% of your business well is a good package. Plan for the other 20% before you buy it.
There's also the history. These platforms grew out of service work. They flex to fit projects, and they do it reasonably well, but they aren't project-centric. If projects are most of your business, you'll notice.
3. Project-first tools
For trade contractors: NextMinute, Workbench. For builders: Buildxact, MyConstruct, Builda Price, Buildertrend. For civil and plant-heavy crews: Assignar. And at the top end, Procore.
These start from the project. Estimating, the program, labour and materials against budget, actual versus estimate. If a job in your business means weeks on site with a crew, this camp understands you better than the first two.
The catch is that a lot of them are built for the builder, not the trade working inside the builder's project. Reactive service work is usually an afterthought. Some are closed boxes: NextMinute, for example, has no public API, so getting data in and out takes effort.
And here's the gap I keep running into. There aren't many good packages that give a large trade contractor proper project-first control without stepping all the way up to something like Procore. Procore is full construction management software built for head contractors. A trade contractor buying it gets a lot of things they don't need, at a price set for businesses that do.
4. Everything around it
Rostering (Deputy), takeoff (Groundplan), supplier invoices (EzzyBills), safety and inspections (SafetyCulture, Worx), and your accounting system.
None of these is job management, but every trade business ends up with a few. Whatever you pick from camps one to three has to work with them. When it doesn't, someone in the office spends a day a week typing the same thing into three places. That's the patchwork, and in my experience it's the most common "system" in the industry.
When a business does both
This is the situation I see most in businesses over about twenty staff, and it's where buying one package tends to go wrong.
A commercial plumbing contractor with more than sixty staff is a good example. Their core work is projects, on sites that run for months. They looked at AroFlo and tried to put it in, and they struggled with it. It didn't address the things they actually needed on the project side.
So the project side went custom: a system built around how they run their sites, covering sign-in and timesheets for the whole crew, purchasing from a catalogue at the best price, and the reporting their monthly meeting runs off.
Then the business started branching into service work through its maintenance arm. Service plumbing is common enough that a good package already does it well, so they pulled Fergus off the shelf. Building that from scratch would have been a waste of their money.
One business, two kinds of job, two different answers.
Neither "buy the all-in-one" nor "build everything" would have got them there.
What good looks like
Put all that together and the picture is pretty clear. You shouldn't have to bend your business to fit software. Software should bend to fit your business. Sometimes that means taking a package as it is, because the way the system does it really is the better way. Sometimes it means building the piece that no package has a box for. Most of the time it's a mix, and knowing which is which is the actual job.
In practice a business that's got this right has:
- software chosen for the kind of job it actually runs, worked out before anyone booked a demo
- the freedom to keep what works, connect it, build what's missing or buy something better, without being locked into one product
- each piece of information entered once, and one set of numbers across the whole business
- changes brought in a step at a time, at a pace the team can take
It can go either way. Hyforce Engineering had a field service system that made them work its way and charged them for the privilege. They replaced it with one built around how they run, on the Office 365 they already paid for, and their licence costs went down. For the plumbing contractor's service side it was the opposite call: buy it, because buying was right.
Where to start
If you're stuck choosing, or you've already bought something and it isn't fitting, start with the fit check. It takes a few minutes and tells you how your business fits together today.
If you'd rather talk it through, our work starts with a fixed-price entry package, from $10,000 ex GST. We spend time in your business working out what's really going on, then start on the first problem. That might be choosing and setting up the right package, connecting what you've already got, or building the bit that's missing. Get in touch and we'll have a chat.
Job management software: common questions
What's the best job management software for tradies?
It depends on what a job is in your business. For lots of short service jobs and under about twenty staff, ServiceM8, Tradify or Fergus will do the job, and the best one is usually the one your team likes using. For larger businesses with maintenance contracts and some projects, Simpro or AroFlo. For project-heavy trade contractors, look at the project-first tools, and expect to connect or build around the gaps.
Are Simpro and AroFlo the same company?
Yes. Simpro acquired AroFlo in 2021, in the same deal as the K1 investment, and AroFlo still runs under its own brand and team.
Is job management software different from construction management software?
Mostly, yes. Job management software usually comes from the service side: quote, book, attend, invoice. Construction management software like Procore comes from the head contractor side: drawings, RFIs, subcontractors, the whole build. Trade contractors often sit awkwardly between the two.
Should we build our own instead?
Only when it's the only answer. If a package does it well, buy the package. Build the part that makes your business different, and connect it to the rest.
We already have Simpro or AroFlo and it's not working. Do we have to replace it?
Usually not. More often it was set up quickly and never properly embedded, or there's a 20% of the business it was never going to cover. Both of those can be fixed without ripping it out.
Not sure which kind of software fits?
Tell us how the work runs today. We'll tell you whether to buy, connect what you've got, or build the bit that's missing.
